Contact Us: (877) 572-5515 7000 West Victory Rd. Boise, Idaho 83709

Start Up and Training on Gas Cabinets CSI technicians to ensure a smooth and effective system start up. At your facility, the team will modify the Controller software to run the gases you desire and perform final check out at your facility. Each gas cabinet undergoes a highly detailed inspection to ensure it is functioning properly, and software revisions are uploaded to the controller. On the heels of installation, systems and software training is provided. This is typically scheduled as a full-day training on single cabinet installations, or 2+ days on multi-cabinet installations. Detailed records are kept, and ongoing support is provided by...

28 October, 2012 /

CSI has developed the industry leading reconditioning process for all of the gas systems that we provide to the industry. This process has been refined over the years as we’ve reconditioned and delivered over 1000 gas systems in the past decade. [gallery ids="1305,1304,1006" orderby="rand"] [vc_separator type='normal' position='center' color='#0a0a0a' thickness='4px' up='10px' down=''] Customization and Assembly Critical Systems selects the finest preowned gas cabinets, process gas panels, and point-of-use scrubbers available, and inspects each one prior to placing in our inventory. Every cabinet, gas scrubber, gas panel, and distribution box is thoroughly cleaned, primed and painted, and then assembled to customer specification. [vc_separator type='normal' position='center' color='#0a0a0a' thickness='4px' up='10px'...

28 October, 2012 /

Gas system selection, manufacture and layout is rarely straightforward process. One of the biggest considerations is safety and code requirements.   Adherence to code involves knowledge of the gases, pressure, properties, and other factors to assure that the selected systems will meet local and national standards, such as the UFC (Uniform Fire Code) and CGA G13 Gas code. [gallery columns="5" ids="1285,1284,1305,1304,997" orderby="rand"]   If customer requirements are unique or complex, the process can also involve a number of iterations to create a system that will perform properly. In many instances, there are multiple ways that a gas system can be configured that will have a...

28 October, 2012 /

An unfortunate reality for many Fabs is that gas lines get contaminated. Whether it’s due to a faulty fitting or an error during a cycle purge, leaks can cause panels to become contaminated. The good news is that a costly new panel is not your only option. Through our fabrication expertise and expansive inventory of components, CSI can recondition and warranty panels and tube assemblies quickly and inexpensively. [gallery ids="945,944,943" orderby="rand"] [vc_separator type='normal' position='center' color='#080808' thickness='5px' up='10px' down=''] Reconditioning & Repair Process for Contaminated Panels We require the gas systems to be purged prior to shipment, a decontamination form filled out and signed by...

26 October, 2012 /