Jupiter Scientific’s Europa Dry Scrubber is a point-of-use facility exhaust treatment system with a broad range of process gas scrubbing capability. The Europa scrubber employs Jupiter Scientific’s Europa Scrubbing Canisters to offer the lowest emissions of any scrubber available today. In all cases where the Europa is employed it offers guaranteed scrubbing of the target gases to levels below Threshold Limit Values.
The Europa operates in a totally passive mode at ambient temperature . Dry chemical resins efficiently react on contact with process gases and by products, converting them to non-volatile solids. Advanced scrubbing capabilities, combined with multiple levels of safety engineering, make the Europa one of the safest and most efficient scrubbers available.
The Europa System:
Catastrophic Release Scrubbers:
A Catastrophic Release Scrubber is installed in the gas cabinet or fume hood exhaust line, and is designed to capture a full cylinder’s release of the target gas that resides in the gas cabinet. This cost effective scrubber uses a dry bed ambient media and requires no fuel or water to operate. Its purpose is to provide a safe abatement solution should a hazardous gas cylinder develop a leaking cylinder valve or should a situation occur in the gas cabinet which causes a leak that cannot be shut off.
Exhaust Flow per System 500 SCFM
Removal Efficiency Sub TLV Emissions
Purge Gas – Nitrogen 25 SCFM*
Pneumatics – Nitrogen 500 sccms
Clean Dry Air (CDA) 10 SCFH (For Air Ox.)*
Process Connections NW160 Flange
Compressed Gas – Nitrogen 60 – 80 psig (5.5 bar)
3/8” compression fitting
Clean Dry Air (CDA) 60 – 80 psig (5.5 bar)
1/4” compression fitting
Electrical Supply 110/220 VAC, 50/60 Hz
Overall Dimension (in): 56 H X 41.7 W X 41.7 D
* Purge Nitrogen & CDA is used only when replacing
Since 1998, Critical Systems, Inc. (CSI) has been providing Gas Cabinet, Valve Manifold Boxes & Gas Abatement Systems (Gas Cabinets and Gas Scrubbers, etc.), and Orbital Welding Rental, Lease, Repair and Training Services related to process tool facilitation for Semiconductor, Biotech, Pharmaceutical and related industries. Company headquarters are in Boise, ID USA, with additional locations in Shrewsbury, PA USA – Draper, UT USA – and our new European Sales and Service center in the Netherlands.